Countertops & Cabinets in Edgewood, NM

Edgewood is home base

Our shop sits at 2369 Old Hwy 66. Everything we install anywhere in central New Mexico is templated, cut, and finished here, which means Edgewood customers get the shortest version of every timeline we run and the easiest access to the material itself. You can drive over, walk the slabs, and put your hand on the actual piece of granite that is going into your kitchen. That is not something a catalog order can offer.

It also means no travel charges, easy re-visits if something needs a second look, and a crew that is usually ten minutes away rather than an hour out from town.

What Edgewood homes actually need

Edgewood sits around 6,700 feet, and the housing mix out here is different from anything in the metro — larger lots, a lot of owner-built and custom homes, manufactured homes on permanent foundations, and a wide spread of construction dates and quality. Almost nothing is a standard tract layout, which is exactly why stock cabinetry so often does not fit. Odd wall lengths, non-square corners, and vaulted or varied ceiling heights are the norm here, not the exception.

Well water is the other genuine local factor. Mineral-heavy water spots dark polished surfaces and leaves buildup, so we talk about it before you pick a material rather than after you are annoyed by it. Households on a well often do better with a non-porous quartz, or with granite kept properly sealed so minerals stay on the surface where a cloth can get them.

Where we rank — and what that means for you

We are the top-ranked kitchen remodeler in Edgewood on Google, which we mention for one practical reason: the reviews behind that ranking come from your neighbors. Ask around. In a town this size, a contractor’s reputation is the only marketing that actually holds up.

What we do in Edgewood

• Granite Countertops — natural stone laid out on your actual slab, sealed at install.
• Quartz Countertops — engineered, non-porous, never sealed — the zero-maintenance choice.
• Marble Countertops — vanities, surrounds, and baking stations, with honest guidance on etching.
• Countertop Replacement — tear out tile, laminate, or dated stone and install new tops in days, not weeks.
• Custom Cabinets in Edgewood — built to your walls in our Edgewood shop, not ordered in three-inch increments.
• Cabinet Refacing — new doors, drawer fronts, and veneer on boxes that are still sound.
• Kitchen Remodeling — cabinets and countertops from one crew, on one schedule.
• Bathroom Remodeling — custom vanities and stone tops built to the space you actually have.
• Commercial & Hospitality — hotel vanities, reception desks, break rooms, and multi-unit cabinet packages.

Choosing a countertop material in Edgewood

Most people arrive with a material already in mind. We will fabricate whatever you choose, but we are also going to tell you where each one struggles, because the climate here is not neutral. Edgewood sits at 6,700 feet with wide-open south exposure on most lots. Most of Edgewood is on well water with heavy mineral content.

• Granite — $55–$95 per sq ft installed. Igneous stone, every slab unique, indifferent to heat and sun. Needs sealing every one to three years. The default recommendation for sunrooms, outdoor bars, and anyone who cooks hard.
• Quartz — $65–$120 per sq ft installed. Engineered, non-porous, never sealed, consistent from sample to slab. The default for busy family kitchens and for anyone who will not think about maintenance. Keep it out of direct all-day sun.
• Marble — $75–$150 per sq ft installed. The most beautiful stone we cut and the softest. Perfect for vanities, fireplace surrounds, and a baking station. Etches from acids in a working kitchen, and we will say so.
• Quartzite — $85–$160 per sq ft installed. Natural stone that reads like marble and wears like granite. The answer when someone wants a white veined top in a kitchen that actually gets used.

Every one of those is templated, cut, and polished in our shop at 2369 Old Hwy 66, Edgewood, NM 87015, which is why we can hold a seam tight and keep an overhang even. You can see the full breakdown on our pricing guide.

How we build cabinets for Edgewood homes

Custom does not mean expensive for its own sake. It means the box is built to the wall you actually have, in the increment you actually need, rather than the closest three-inch stock size plus a filler strip. In a region where very few walls are square and ceiling heights change room to room, that is usually the difference between a kitchen that looks fitted and one that looks installed.

• Boxes. Three-quarter-inch plywood, not particleboard. Particleboard that has met water once — a slow dishwasher leak, a sink trap drip — swells and never recovers. Plywood survives it.
• Doors and drawer fronts. Shaker, flat-slab, raised panel, or inset. Paint-grade maple or poplar, stain-grade alder, hickory, oak, or walnut. Knotty alder is the regional favorite for a reason: it takes a warm stain and hides the dings of a real household.
• Hardware. Soft-close hinges and full-extension undermount drawer slides as standard. Not an upgrade.
• Finish. Sprayed in the shop, not brushed on site. Conversion varnish over stain, or a catalyzed enamel over paint. It is the difference between a finish that holds up to fifteen years of hands and one that chips at the pulls in two.
• Layout. Drawers where you reach down, doors where you reach up. Pull-outs for trash and spices. A pantry that uses the full height of the wall. This is the part that makes a kitchen work, and it is the part a catalog cannot do.

Typical installed pricing runs $350–$900 per linear ft installed depending on wood species, door style, and how much of the run is drawers. Full details on custom cabinets →

Why hiring one shop for cabinets and countertops matters in Edgewood

Most remodels in Edgewood involve two companies who have never met: one sets cabinets, another fabricates stone. When the countertop does not sit flat, each explains why it is the other’s fault, and you are left holding a gap, a tube of caulk, and two phone numbers.

We run both sides under one roof. Cabinets are set and leveled by our crew, then the countertop is templated against those cabinets, cut in the same building, and installed by the same people. If something is off, it is ours, and there is nobody to point at. That is not a slogan. It is the reason the business is structured this way, and it is the reason the seams line up.

It also has a practical scheduling benefit. One contractor means one calendar, so cabinets and tops land in sequence instead of leaving your kitchen torn out for a week while a second company finds an opening.

How a project runs with us

1. Call or send the form. Jesus answers, asks what you are trying to do, and books a time to come measure. Edgewood is home: the shop is on Old Hwy 66 and most jobs are minutes away.
2. On-site measurement and a straight conversation. We look at the room, the plumbing, the walls, and how you cook. If a material is wrong for your situation, this is where we say so.
3. One written number. Template, fabrication, tear-out, install, haul-away, sealing. No per-item surprises after the fact.
4. Slab or sample approval. For natural stone you see the actual slab and where the cuts land. For cabinets you approve a door sample and a finish chip.
5. Fabrication in Edgewood. Cabinets built and finished in the shop. Countertops laser-templated once the cabinets are set and level, then cut on the CNC and polished.
6. Install by the same crew. The people who measured are the people who build and the people who install. One point of contact from first visit to final walkthrough.

Countertop-only projects typically run one to two weeks from template to install. Full cabinet packages run four to eight weeks depending on wood and finish. A complete kitchen remodel is usually six to ten weeks once materials are approved.

Typical installed pricing in Edgewood

Service	Typical range	Unit
Granite countertops	$55 – $95	sq ft installed
Quartz countertops	$65 – $120	sq ft installed
Custom cabinets	$350 – $900	linear ft installed
Cabinet refacing	$150 – $350	linear ft installed
Full kitchen remodel	$25,000 – $75,000	full remodel
Full bathroom remodel	$12,000 – $40,000	full remodel

Ranges include template, fabrication, standard edge, tear-out of existing tops, install, and sealing where applicable. Exotic slabs, waterfall edges, full-height backsplashes, and structural changes move a project toward the top of the range. Every job is quoted individually after an on-site measurement. See the full pricing guide →

What Edgewood homeowners say

We hold a 4.0-star rating on Google, and the reviews behind it come from the same towns we list on this site. Read them on our Google Business Profile, then ask us for the phone number of a recent customer near you. We would rather you hear it from a neighbor than from us.

Also serving the areas around Edgewood

Our shop in Edgewood puts the whole metro, the East Mountains, and the Santa Fe corridor within a normal working radius. There is no travel charge anywhere on this list.

• Albuquerque
• Northeast Heights
• North Valley
• Westside Albuquerque
• Los Ranchos de Albuquerque
• Rio Rancho
• Corrales
• Bernalillo