Countertops & custom cabinets — one shop, one crew, one number(505) 203-5508
SERVICE AREA

Countertops & Cabinets in Rio Rancho, NM

Builder-grade kitchens with good bones — upgraded with real stone and real cabinetry.

  • 4.0 ★ Google
  • Owner on every job
  • Own fabrication shop
  • Free on-site estimates
QUICK ANSWER

JYJ FLIPS LLC fabricates and installs granite, quartz, marble, and quartzite countertops and builds custom cabinets for Rio Rancho, NM, from our shop at 2369 Old Hwy 66, Edgewood. Rio Rancho is about fifty minutes from the shop and we batch measurements and installs there. Owner Jesus measures, builds, and installs. Granite $55–$95 per sq ft installed, quartz $65–$120 per sq ft installed, custom cabinets $350–$900 per linear ft installed, refacing $150–$350 per linear ft installed.

Area
Rio Rancho, NM · Rio Rancho & Sandoval County
Travel charge
None
Rating
4.0 ★ on Google
Phone
(505) 203-5508
Estimates
Free, on-site, written quote from the owner

Newer houses, builder-grade finishes

Rio Rancho is one of the newest housing stocks in the metro — largely built through the 1990s, 2000s, and 2010s. That changes what a remodel here looks like compared to an older Albuquerque or East Mountain home.

These kitchens generally do not have a layout problem. The work triangle is sensible, the island is where it should be, the plumbing is where you want it. What they have is a finish problem: laminate or entry-level countertops, particleboard cabinet boxes with thermofoil or basic stock doors, and hinges that have begun to sag after fifteen or twenty years of use.

That is genuinely good news, because upgrading finish is far more efficient than rebuilding a room. You are not moving walls or plumbing. You are replacing the parts you touch and look at every day.

The highest-value move here

For most Rio Rancho homes, new countertops alone deliver the biggest visible change per dollar of anything available. Swapping builder laminate or a thin entry-level top for real granite or quartz changes the entire read of the kitchen, and because the existing cabinets are usually square and modern, templating against them is straightforward. Most of these jobs run about a week from template to installed.

From there, refacing sound boxes with new doors and drawer fronts, or replacing the cabinetry outright where the boxes have swelled or failed, completes the picture. We will look at your boxes and tell you honestly which of those two you need — particleboard that has met water is not worth refacing, and we will say so.

What we do in Rio Rancho

Choosing a countertop material in Rio Rancho

Most people arrive with a material already in mind. We will fabricate whatever you choose, but we are also going to tell you where each one struggles, because the climate here is not neutral. Rio Rancho homes face east toward the Sandias with strong morning sun through kitchen glass. Rio Rancho water is notably hard; it spots dark stone and argues for quartz or a well-sealed, patterned granite.

  • Granite — $55–$95 per sq ft installed. Igneous stone, every slab unique, indifferent to heat and sun. Needs sealing every one to three years. The default recommendation for sunrooms, outdoor bars, and anyone who cooks hard.
  • Quartz — $65–$120 per sq ft installed. Engineered, non-porous, never sealed, consistent from sample to slab. The default for busy family kitchens and for anyone who will not think about maintenance. Keep it out of direct all-day sun.
  • Marble — $75–$150 per sq ft installed. The most beautiful stone we cut and the softest. Perfect for vanities, fireplace surrounds, and a baking station. Etches from acids in a working kitchen, and we will say so.
  • Quartzite — $85–$160 per sq ft installed. Natural stone that reads like marble and wears like granite. The answer when someone wants a white veined top in a kitchen that actually gets used.

Every one of those is templated, cut, and polished in our shop at 2369 Old Hwy 66, Edgewood, NM 87015, which is why we can hold a seam tight and keep an overhang even. You can see the full breakdown on our pricing guide.

How we build cabinets for Rio Rancho homes

Custom does not mean expensive for its own sake. It means the box is built to the wall you actually have, in the increment you actually need, rather than the closest three-inch stock size plus a filler strip. In a region where very few walls are square and ceiling heights change room to room, that is usually the difference between a kitchen that looks fitted and one that looks installed.

  • Boxes. Three-quarter-inch plywood, not particleboard. Particleboard that has met water once — a slow dishwasher leak, a sink trap drip — swells and never recovers. Plywood survives it.
  • Doors and drawer fronts. Shaker, flat-slab, raised panel, or inset. Paint-grade maple or poplar, stain-grade alder, hickory, oak, or walnut. Knotty alder is the regional favorite for a reason: it takes a warm stain and hides the dings of a real household.
  • Hardware. Soft-close hinges and full-extension undermount drawer slides as standard. Not an upgrade.
  • Finish. Sprayed in the shop, not brushed on site. Conversion varnish over stain, or a catalyzed enamel over paint. It is the difference between a finish that holds up to fifteen years of hands and one that chips at the pulls in two.
  • Layout. Drawers where you reach down, doors where you reach up. Pull-outs for trash and spices. A pantry that uses the full height of the wall. This is the part that makes a kitchen work, and it is the part a catalog cannot do.

Typical installed pricing runs $350–$900 per linear ft installed depending on wood species, door style, and how much of the run is drawers. Full details on custom cabinets →

Why hiring one shop for cabinets and countertops matters in Rio Rancho

Most remodels in Rio Rancho involve two companies who have never met: one sets cabinets, another fabricates stone. When the countertop does not sit flat, each explains why it is the other’s fault, and you are left holding a gap, a tube of caulk, and two phone numbers.

We run both sides under one roof. Cabinets are set and leveled by our crew, then the countertop is templated against those cabinets, cut in the same building, and installed by the same people. If something is off, it is ours, and there is nobody to point at. That is not a slogan. It is the reason the business is structured this way, and it is the reason the seams line up.

It also has a practical scheduling benefit. One contractor means one calendar, so cabinets and tops land in sequence instead of leaving your kitchen torn out for a week while a second company finds an opening.

How a project runs with us

  1. Call or send the form. Jesus answers, asks what you are trying to do, and books a time to come measure. Rio Rancho is about fifty minutes from the shop and we batch measurements and installs there.
  2. On-site measurement and a straight conversation. We look at the room, the plumbing, the walls, and how you cook. If a material is wrong for your situation, this is where we say so.
  3. One written number. Template, fabrication, tear-out, install, haul-away, sealing. No per-item surprises after the fact.
  4. Slab or sample approval. For natural stone you see the actual slab and where the cuts land. For cabinets you approve a door sample and a finish chip.
  5. Fabrication in Edgewood. Cabinets built and finished in the shop. Countertops laser-templated once the cabinets are set and level, then cut on the CNC and polished.
  6. Install by the same crew. The people who measured are the people who build and the people who install. One point of contact from first visit to final walkthrough.

Countertop-only projects typically run one to two weeks from template to install. Full cabinet packages run four to eight weeks depending on wood and finish. A complete kitchen remodel is usually six to ten weeks once materials are approved.

Typical installed pricing in Rio Rancho

ServiceTypical rangeUnit
Granite countertops$55 – $95sq ft installed
Quartz countertops$65 – $120sq ft installed
Custom cabinets$350 – $900linear ft installed
Cabinet refacing$150 – $350linear ft installed
Full kitchen remodel$25,000 – $75,000full remodel
Full bathroom remodel$12,000 – $40,000full remodel

Ranges include template, fabrication, standard edge, tear-out of existing tops, install, and sealing where applicable. Exotic slabs, waterfall edges, full-height backsplashes, and structural changes move a project toward the top of the range. Every job is quoted individually after an on-site measurement. See the full pricing guide →

What Rio Rancho homeowners say

We hold a 4.0-star rating on Google, and the reviews behind it come from the same towns we list on this site. Read them on our Google Business Profile, then ask us for the phone number of a recent customer near you. We would rather you hear it from a neighbor than from us.

Also serving the areas around Rio Rancho

Our shop in Edgewood puts the whole metro, the East Mountains, and the Santa Fe corridor within a normal working radius. There is no travel charge anywhere on this list.

Serving Rio Rancho — free estimates, no travel charge. (505) 203-5508
FAQ

Rio Rancho Questions

Our house is only fifteen years old. Is it worth remodeling the kitchen?

Very often, yes — and Rio Rancho is where this comes up most. Homes built through the 1990s and 2000s boom were finished to a builder budget: laminate or entry-level tops, particleboard cabinet boxes with thermofoil or basic stock doors, and hardware that has started to sag. The layout is usually fine because the house is modern. That makes it an unusually efficient project, because you are upgrading finish rather than rebuilding a room. New stone tops alone transform these kitchens, and refacing or replacing doors on sound boxes takes it the rest of the way.

Can you just replace the countertops and leave the cabinets?

Absolutely, and in newer Rio Rancho homes that is frequently the smartest move. If the boxes are solid and the layout works, new stone is the single highest-impact change you can make for the money. We template against your existing cabinets, cut and polish in our shop, pull the old tops, and install. Most of these jobs are done in about a week from template.

How far is Rio Rancho from your shop?

We are in Edgewood, so Rio Rancho is the longest regular run we make — across the metro to the northwest. We serve it steadily and estimates are free. Because we fabricate everything ourselves, scheduling stays tight even at that distance.

GET STARTED

Request Your Free Quote

Call or text(505) 203-5508 Email[email protected]
Shop2369 Old Hwy 66, Edgewood, NM 87015
HoursMonday – Friday, 8:00 a.m. – 5:00 p.m.

Prefer to talk? Call or text (505) 203-5508. Response within one business day.

✓ Sent! Jesus will be in touch.
Free Quote