Countertops & Cabinets in the East Mountains
Edgewood, Cedar Crest, Sandia Park, Tijeras, Moriarty — we are based up here, not driving out from town.
- 4.0 ★ Google
- Owner on every job
- Own fabrication shop
- Free on-site estimates
JYJ FLIPS LLC fabricates and installs granite, quartz, marble, and quartzite countertops and builds custom cabinets for East Mountains, NM, from our shop at 2369 Old Hwy 66, Edgewood. The East Mountains are our backyard; the shop is in Edgewood. Owner Jesus measures, builds, and installs. Granite $55–$95 per sq ft installed, quartz $65–$120 per sq ft installed, custom cabinets $350–$900 per linear ft installed, refacing $150–$350 per linear ft installed.
- Area
- East Mountains, NM · East Mountains
- Travel charge
- None
- Rating
- 4.0 ★ on Google
- Phone
- (505) 203-5508
- Estimates
- Free, on-site, written quote from the owner
A local shop, actually located locally
Most contractors serving the East Mountains are Albuquerque companies who treat the drive as an inconvenience and price it accordingly. We are the other way around: our shop is in Edgewood, in the middle of the area we serve. Cedar Crest, Sandia Park, Tijeras, and Moriarty are all short runs for us, so there is no travel surcharge and no reluctance to come back out for a punch-list item.
Building for mountain conditions
Elevation up here ranges from roughly 6,300 feet down in Tijeras Canyon to above 7,000 feet in the higher stretches along the Turquoise Trail. That means colder winters, drier air, and larger daily temperature swings than the metro sees — and it means wood behaves differently than it does in a catalog photo taken somewhere humid.
Practically, we build carcasses from plywood rather than particleboard, finish panels on every face before assembly so seasonal movement never exposes raw wood, and steer clients toward door styles that tolerate movement gracefully. Homes on wood heat get particular attention, because a stove running hard all winter drives indoor humidity even lower.
The look that suits these houses
East Mountain homes tend toward warm and substantial — timber, stone, and views that the kitchen should not fight with. Heavier granites and quartzites in warm tones sit naturally in that setting, and knotty alder and hickory cabinetry are perennially popular up here for good reason. That said, we build plenty of clean modern kitchens in mountain homes; a bright white quartz against big windows and a forest view is a genuinely striking combination.
Communities we serve up here
- Edgewood — where our shop is.
- Cedar Crest — the Sandia foothills along NM-14.
- Sandia Park — higher, forested, Turquoise Trail.
- Tijeras — the canyon corridor.
- Moriarty — out into the Estancia Valley.
What we do in East Mountains
- Granite Countertops — natural stone laid out on your actual slab, sealed at install.
- Quartz Countertops — engineered, non-porous, never sealed — the zero-maintenance choice.
- Marble Countertops — vanities, surrounds, and baking stations, with honest guidance on etching.
- Countertop Replacement — tear out tile, laminate, or dated stone and install new tops in days, not weeks.
- Custom Cabinets — built to your walls in our Edgewood shop, not ordered in three-inch increments.
- Cabinet Refacing — new doors, drawer fronts, and veneer on boxes that are still sound.
- Kitchen Remodeling — cabinets and countertops from one crew, on one schedule.
- Bathroom Remodeling — custom vanities and stone tops built to the space you actually have.
- Commercial & Hospitality — hotel vanities, reception desks, break rooms, and multi-unit cabinet packages.
Choosing a countertop material in East Mountains
Most people arrive with a material already in mind. We will fabricate whatever you choose, but we are also going to tell you where each one struggles, because the climate here is not neutral. East Mountain homes are at 6,500 to 7,500 feet with the strongest UV we work in. Nearly everything in the East Mountains is on a well.
- Granite — $55–$95 per sq ft installed. Igneous stone, every slab unique, indifferent to heat and sun. Needs sealing every one to three years. The default recommendation for sunrooms, outdoor bars, and anyone who cooks hard.
- Quartz — $65–$120 per sq ft installed. Engineered, non-porous, never sealed, consistent from sample to slab. The default for busy family kitchens and for anyone who will not think about maintenance. Keep it out of direct all-day sun.
- Marble — $75–$150 per sq ft installed. The most beautiful stone we cut and the softest. Perfect for vanities, fireplace surrounds, and a baking station. Etches from acids in a working kitchen, and we will say so.
- Quartzite — $85–$160 per sq ft installed. Natural stone that reads like marble and wears like granite. The answer when someone wants a white veined top in a kitchen that actually gets used.
Every one of those is templated, cut, and polished in our shop at 2369 Old Hwy 66, Edgewood, NM 87015, which is why we can hold a seam tight and keep an overhang even. You can see the full breakdown on our pricing guide.
How we build cabinets for East Mountains homes
Custom does not mean expensive for its own sake. It means the box is built to the wall you actually have, in the increment you actually need, rather than the closest three-inch stock size plus a filler strip. In a region where very few walls are square and ceiling heights change room to room, that is usually the difference between a kitchen that looks fitted and one that looks installed.
- Boxes. Three-quarter-inch plywood, not particleboard. Particleboard that has met water once — a slow dishwasher leak, a sink trap drip — swells and never recovers. Plywood survives it.
- Doors and drawer fronts. Shaker, flat-slab, raised panel, or inset. Paint-grade maple or poplar, stain-grade alder, hickory, oak, or walnut. Knotty alder is the regional favorite for a reason: it takes a warm stain and hides the dings of a real household.
- Hardware. Soft-close hinges and full-extension undermount drawer slides as standard. Not an upgrade.
- Finish. Sprayed in the shop, not brushed on site. Conversion varnish over stain, or a catalyzed enamel over paint. It is the difference between a finish that holds up to fifteen years of hands and one that chips at the pulls in two.
- Layout. Drawers where you reach down, doors where you reach up. Pull-outs for trash and spices. A pantry that uses the full height of the wall. This is the part that makes a kitchen work, and it is the part a catalog cannot do.
Typical installed pricing runs $350–$900 per linear ft installed depending on wood species, door style, and how much of the run is drawers. Full details on custom cabinets →
Why hiring one shop for cabinets and countertops matters in East Mountains
Most remodels in East Mountains involve two companies who have never met: one sets cabinets, another fabricates stone. When the countertop does not sit flat, each explains why it is the other’s fault, and you are left holding a gap, a tube of caulk, and two phone numbers.
We run both sides under one roof. Cabinets are set and leveled by our crew, then the countertop is templated against those cabinets, cut in the same building, and installed by the same people. If something is off, it is ours, and there is nobody to point at. That is not a slogan. It is the reason the business is structured this way, and it is the reason the seams line up.
It also has a practical scheduling benefit. One contractor means one calendar, so cabinets and tops land in sequence instead of leaving your kitchen torn out for a week while a second company finds an opening.
How a project runs with us
- Call or send the form. Jesus answers, asks what you are trying to do, and books a time to come measure. The East Mountains are our backyard; the shop is in Edgewood.
- On-site measurement and a straight conversation. We look at the room, the plumbing, the walls, and how you cook. If a material is wrong for your situation, this is where we say so.
- One written number. Template, fabrication, tear-out, install, haul-away, sealing. No per-item surprises after the fact.
- Slab or sample approval. For natural stone you see the actual slab and where the cuts land. For cabinets you approve a door sample and a finish chip.
- Fabrication in Edgewood. Cabinets built and finished in the shop. Countertops laser-templated once the cabinets are set and level, then cut on the CNC and polished.
- Install by the same crew. The people who measured are the people who build and the people who install. One point of contact from first visit to final walkthrough.
Countertop-only projects typically run one to two weeks from template to install. Full cabinet packages run four to eight weeks depending on wood and finish. A complete kitchen remodel is usually six to ten weeks once materials are approved.
Typical installed pricing in East Mountains
| Service | Typical range | Unit |
|---|---|---|
| Granite countertops | $55 – $95 | sq ft installed |
| Quartz countertops | $65 – $120 | sq ft installed |
| Custom cabinets | $350 – $900 | linear ft installed |
| Cabinet refacing | $150 – $350 | linear ft installed |
| Full kitchen remodel | $25,000 – $75,000 | full remodel |
| Full bathroom remodel | $12,000 – $40,000 | full remodel |
Ranges include template, fabrication, standard edge, tear-out of existing tops, install, and sealing where applicable. Exotic slabs, waterfall edges, full-height backsplashes, and structural changes move a project toward the top of the range. Every job is quoted individually after an on-site measurement. See the full pricing guide →
What East Mountains homeowners say
We hold a 4.0-star rating on Google, and the reviews behind it come from the same towns we list on this site. Read them on our Google Business Profile, then ask us for the phone number of a recent customer near you. We would rather you hear it from a neighbor than from us.
Also serving the areas around East Mountains
Our shop in Edgewood puts the whole metro, the East Mountains, and the Santa Fe corridor within a normal working radius. There is no travel charge anywhere on this list.
East Mountains Questions
Which East Mountain communities do you serve?
Edgewood, Cedar Crest, Sandia Park, Tijeras, Moriarty, Stanley, Golden, and the surrounding areas along NM-14 and the I-40 corridor. Our shop is in Edgewood, so the entire East Mountain area is genuinely local for us rather than a long haul from town.
Do mountain homes need different materials?
Somewhat, yes. Elevation up here runs from roughly 6,300 feet in the canyon to over 7,000 in the higher communities, and the air is drier and colder than in Albuquerque. Dry air makes solid wood move more, so we build cabinet boxes from plywood and finish panels on all faces. Homes heated by wood stoves see bigger daily temperature and humidity swings, which is worth mentioning to us because it affects which door styles we recommend.
Is there a travel charge to come up the mountain?
No. We are based in Edgewood, in the middle of it. Estimates throughout the East Mountains are free and there is no distance surcharge.