Countertops & Cabinets in Sandia Park, NM
Up the Turquoise Trail, near the crest — and still a local job for a shop based in Edgewood.
- 4.0 ★ Google
- Owner on every job
- Own fabrication shop
- Free on-site estimates
JYJ FLIPS LLC fabricates and installs granite, quartz, marble, and quartzite countertops and builds custom cabinets for Sandia Park, NM, from our shop at 2369 Old Hwy 66, Edgewood. Sandia Park is about twenty minutes from the shop up NM-14 and NM-536. Owner Jesus measures, builds, and installs. Granite $55–$95 per sq ft installed, quartz $65–$120 per sq ft installed, custom cabinets $350–$900 per linear ft installed, refacing $150–$350 per linear ft installed.
- Area
- Sandia Park, NM · East Mountains
- Travel charge
- None
- Rating
- 4.0 ★ on Google
- Phone
- (505) 203-5508
- Estimates
- Free, on-site, written quote from the owner
Same side of the mountain
Sandia Park sits high along NM-14 toward the Sandia Crest road, forested and well above the metro. For an Albuquerque contractor it is a haul. For us it is a normal day — our shop is in Edgewood, so we are already on this side of the mountain. That means no travel surcharge and no hesitation about coming back out.
High, dry, and heated with wood
At better than 7,000 feet, Sandia Park gets real winters, and a lot of homes here run a wood stove or fireplace hard from October through April. That drives indoor humidity down to levels most cabinet manufacturers never design for, and solid wood responds by shrinking. We build with that as a given: plywood carcasses, panels sealed on every face before assembly so a shrinking panel never exposes an unfinished edge, and door styles selected for how much movement the species will show.
The intense sun at this elevation is the other genuine factor. It is why we will occasionally steer a client away from engineered quartz for a specific sun-drenched run and toward granite or quartzite instead.
Access, planned in advance
Long driveways, switchbacks, gravel, and tight turns are the norm here. Stone is extremely heavy and there is no improvising on install day. We look at the approach when we template and bring the equipment and crew the job actually requires.
What we do in Sandia Park
- Granite Countertops — natural stone laid out on your actual slab, sealed at install.
- Quartz Countertops — engineered, non-porous, never sealed — the zero-maintenance choice.
- Marble Countertops — vanities, surrounds, and baking stations, with honest guidance on etching.
- Countertop Replacement — tear out tile, laminate, or dated stone and install new tops in days, not weeks.
- Custom Cabinets — built to your walls in our Edgewood shop, not ordered in three-inch increments.
- Cabinet Refacing — new doors, drawer fronts, and veneer on boxes that are still sound.
- Kitchen Remodeling — cabinets and countertops from one crew, on one schedule.
- Bathroom Remodeling — custom vanities and stone tops built to the space you actually have.
- Commercial & Hospitality — hotel vanities, reception desks, break rooms, and multi-unit cabinet packages.
Choosing a countertop material in Sandia Park
Most people arrive with a material already in mind. We will fabricate whatever you choose, but we are also going to tell you where each one struggles, because the climate here is not neutral. Sandia Park is high and forested; south glass is common and the UV is intense. Sandia Park is on wells and the water is hard.
- Granite — $55–$95 per sq ft installed. Igneous stone, every slab unique, indifferent to heat and sun. Needs sealing every one to three years. The default recommendation for sunrooms, outdoor bars, and anyone who cooks hard.
- Quartz — $65–$120 per sq ft installed. Engineered, non-porous, never sealed, consistent from sample to slab. The default for busy family kitchens and for anyone who will not think about maintenance. Keep it out of direct all-day sun.
- Marble — $75–$150 per sq ft installed. The most beautiful stone we cut and the softest. Perfect for vanities, fireplace surrounds, and a baking station. Etches from acids in a working kitchen, and we will say so.
- Quartzite — $85–$160 per sq ft installed. Natural stone that reads like marble and wears like granite. The answer when someone wants a white veined top in a kitchen that actually gets used.
Every one of those is templated, cut, and polished in our shop at 2369 Old Hwy 66, Edgewood, NM 87015, which is why we can hold a seam tight and keep an overhang even. You can see the full breakdown on our pricing guide.
How we build cabinets for Sandia Park homes
Custom does not mean expensive for its own sake. It means the box is built to the wall you actually have, in the increment you actually need, rather than the closest three-inch stock size plus a filler strip. In a region where very few walls are square and ceiling heights change room to room, that is usually the difference between a kitchen that looks fitted and one that looks installed.
- Boxes. Three-quarter-inch plywood, not particleboard. Particleboard that has met water once — a slow dishwasher leak, a sink trap drip — swells and never recovers. Plywood survives it.
- Doors and drawer fronts. Shaker, flat-slab, raised panel, or inset. Paint-grade maple or poplar, stain-grade alder, hickory, oak, or walnut. Knotty alder is the regional favorite for a reason: it takes a warm stain and hides the dings of a real household.
- Hardware. Soft-close hinges and full-extension undermount drawer slides as standard. Not an upgrade.
- Finish. Sprayed in the shop, not brushed on site. Conversion varnish over stain, or a catalyzed enamel over paint. It is the difference between a finish that holds up to fifteen years of hands and one that chips at the pulls in two.
- Layout. Drawers where you reach down, doors where you reach up. Pull-outs for trash and spices. A pantry that uses the full height of the wall. This is the part that makes a kitchen work, and it is the part a catalog cannot do.
Typical installed pricing runs $350–$900 per linear ft installed depending on wood species, door style, and how much of the run is drawers. Full details on custom cabinets →
Why hiring one shop for cabinets and countertops matters in Sandia Park
Most remodels in Sandia Park involve two companies who have never met: one sets cabinets, another fabricates stone. When the countertop does not sit flat, each explains why it is the other’s fault, and you are left holding a gap, a tube of caulk, and two phone numbers.
We run both sides under one roof. Cabinets are set and leveled by our crew, then the countertop is templated against those cabinets, cut in the same building, and installed by the same people. If something is off, it is ours, and there is nobody to point at. That is not a slogan. It is the reason the business is structured this way, and it is the reason the seams line up.
It also has a practical scheduling benefit. One contractor means one calendar, so cabinets and tops land in sequence instead of leaving your kitchen torn out for a week while a second company finds an opening.
How a project runs with us
- Call or send the form. Jesus answers, asks what you are trying to do, and books a time to come measure. Sandia Park is about twenty minutes from the shop up NM-14 and NM-536.
- On-site measurement and a straight conversation. We look at the room, the plumbing, the walls, and how you cook. If a material is wrong for your situation, this is where we say so.
- One written number. Template, fabrication, tear-out, install, haul-away, sealing. No per-item surprises after the fact.
- Slab or sample approval. For natural stone you see the actual slab and where the cuts land. For cabinets you approve a door sample and a finish chip.
- Fabrication in Edgewood. Cabinets built and finished in the shop. Countertops laser-templated once the cabinets are set and level, then cut on the CNC and polished.
- Install by the same crew. The people who measured are the people who build and the people who install. One point of contact from first visit to final walkthrough.
Countertop-only projects typically run one to two weeks from template to install. Full cabinet packages run four to eight weeks depending on wood and finish. A complete kitchen remodel is usually six to ten weeks once materials are approved.
Typical installed pricing in Sandia Park
| Service | Typical range | Unit |
|---|---|---|
| Granite countertops | $55 – $95 | sq ft installed |
| Quartz countertops | $65 – $120 | sq ft installed |
| Custom cabinets | $350 – $900 | linear ft installed |
| Cabinet refacing | $150 – $350 | linear ft installed |
| Full kitchen remodel | $25,000 – $75,000 | full remodel |
| Full bathroom remodel | $12,000 – $40,000 | full remodel |
Ranges include template, fabrication, standard edge, tear-out of existing tops, install, and sealing where applicable. Exotic slabs, waterfall edges, full-height backsplashes, and structural changes move a project toward the top of the range. Every job is quoted individually after an on-site measurement. See the full pricing guide →
What Sandia Park homeowners say
We hold a 4.0-star rating on Google, and the reviews behind it come from the same towns we list on this site. Read them on our Google Business Profile, then ask us for the phone number of a recent customer near you. We would rather you hear it from a neighbor than from us.
Also serving the areas around Sandia Park
Our shop in Edgewood puts the whole metro, the East Mountains, and the Santa Fe corridor within a normal working radius. There is no travel charge anywhere on this list.
Sandia Park Questions
Do you deliver and install this far up the Turquoise Trail?
Yes, routinely. Sandia Park is a normal service area for us, not a special trip — our shop is in Edgewood, so we are coming from the same side of the mountain you are. No travel charge.
Will a stone slab fit up our driveway?
We check that before install day. Sandia Park properties are often set back on long, sloped, or gravel drives with tight turns, and a fully loaded stone truck has real limits. When we come out to template we assess the approach and the path into the house, then plan equipment and crew size around it. This is routine for us up here.
What holds up best in a mountain cabin kitchen?
Natural stone, generally. Granite and quartzite handle heat, hard use, and the very dry indoor air of a wood-heated house without complaint. Quartz is excellent too, with one local caveat: if a section of countertop sits in direct, unfiltered high-altitude sun for hours — a sunroom or a big south-facing window — natural stone is the safer choice, because intense UV can shift the resin in engineered quartz over time.